Fatigue life
Label
Fatigue life
Name
Fatigue life
Source
nasat
Focus
Actions
Incoming Resources
- Subject of38
- Fatigue-life prediction methodology using small-crack theory, J.C. Newman, Jr. and E.P. Phillips, M.H. Swain
- Rolling bearing life prediction, past, present, and future, E.V. Zaretsky, J.V. Poplawski, C.R. Miller
- NASALIFE--component fatigue and creep life prediction program, John Z. Gyekenyesi, Pappu L.N. Murthy, Subodh K. Mital
- CARES/LIFE Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program, Noel N. Nemeth [and three others]
- Rolling-element fatigue life of ausformed M-50 steel balls, by Richard J. Parker and Erwin V. Zaretsky
- Grain boundary oxidation and an analysis of the effects of pre-oxidation on subsequent fatigue life, Yoshiki Oshida and H.W. Liu
- Effects of a high mean stress on the high-cycle fatigue life of PWA 1480 and correlation of data by linear elastic fracture mechanics, by S. Majumdar and R. Kwasny
- Probabilistic assessment of National Wind Tunnel, A.R. Shah and M. Shiao, C.C. Chamis
- Evaluation of fatigue damage accumulation functions for delamination initiation and propagation, Carlos G. Dávila [and four others]
- Interference-fit life factors for roller bearings, Fred B. Oswald and Erwin V. Zaretsky, Joseph V. Poplawski
- The effectiveness of a NiCrY-coating on a powder metallurgy disk superalloy, Timothy P. Gabb [and five others]
- Predictive failure of cylindrical coatings using Weibull analysis, Brian L. Vlcek, Robert C. Hendricks and Erwin V. Zaretsky
- Model verification and validation concepts for a probabilistic fracture assessment model to predict cracking of knife edge seals in the space shuttle main engine high pressure oxidizer, Shantaram S. Pai, David S. Riha
- Effect of internal clearance on load distribution and life of radially loaded ball and roller bearings, Fred B. Oswald and Erwin V. Zaretsky, Joseph V. Poplawski
- Probabilistic simulation for combined cycle fatigue in composites, Christos C. Chamis
- Factors influencing dwell fatigue cracking in notches of powder metallurgy superalloys, T.P. Gabb ... [and others]
- Comparison of models for ball bearing dynamic capacity and life, Pradeep K. Gupta, Fred B. Oswald and Erwin V. Zaretsky
- Fatigue life of a NiCr-coated powder metallurgy disk superalloy after varied processing and exposures, Timothy P. Gabb [and seven others]
- Test population selection from Weibull-based, Monte Carlo simulations of fatigue life, Brian L. Vlcek, Erwin V. Zaretsky and Robert C. Hendricks
- Nonlinear damage analysis- postulate and evaluation, B.N. Leis and T.P. Forte
- Interference-fit life factors for ball bearings, Fred B. Oswald and Erwin V. Zaretsky, Joseph V. Poplawski
- Fatigue behavior of coated titanium alloys, Dongming Zhu, Bradley A. Lerch, Sreeramesh Kalluri
- Probabilistic simulation for combined thermo-mechanical cyclic fatigue in composites, Christos C. Chamis
- Evaluation of pressurization fatigue life of 1441 Al-Li fuselage panel, R. Keith Bird and Dennis L. Dicus
- Room temperature and elevated temperature composite sandwich joint testing, Sandra P. Walker
- Axial-torsional fatigue, a study of tubular specimen thickness effects, Peter J. Bonacuse and Sreeramesh Kalluri
- Fatigue behavior of flexhoses and bellows due to flow-induced vibrations, final report, prepared by Prateen V. Desai and Lindsey Thornhill
- Space Shuttle rudder/speed brake actuator, a case study, probabilistic fatigue life and reliability analysis, Fred B. Oswald, Michael Savage, Erwin V. Zaretsky
- LCF life of NiCr-Y coated disk alloys after shot peening, oxidation and hot corrosion, James A. Nesbitt [and five others]
- Probabilistic structural analysis methods of hot engine structures, C. C. Chamis and D. A. Hopkins
- Development of a fatigue-life methodology for composite structures subjected to out-of-plane load components, Mark Sumich, Keith T. Kedward
- NASALIFE--component fatigue and creep life prediction program, John Z. Gyekenyesi, Pappu L.N. Murthy, Subodh K. Mital
- System life and reliability modeling for helicopter transmissions, M. Savage and C.K. Brikmanis
- Evaluation of data-logging transducer to passively collect pressure vessel p/T history, Stephen P. Wnuk, Son Le, Raymond A. Loew
- A review of fracture mechanics life technology, Philip M. Besuner, David O. Harris, Jerrell M. Thomas
- Integrated technology rotor/flight research rotor hub concept definition, Peter G.C. Dixon
- Simulating fatigue crack growth in spiral bevel pinion, Ani Ural, Paul A. Wawrzynek, and Anthony R. Ingraffea
- Relation between residual and hoop stresses and rolling bearing fatigue life, Fred B. Oswald and Erwin V. Zaretsky, Joseph V. Poplawski
Outgoing Resources
- Focus1