Structural design
Label
Structural design
Name
Structural design
Source
nasat
Focus
Actions
Incoming Resources
- Practices in adequate structural design, Robert S. Ryan
- Quiet High Speed Fan II (QHSF II), final report, Karen Kontos, Don Weir, and Dave Ross
- NASA N+3 subsonic fixed wing silent efficient low-emissions commercial transport (SELECT) vehicle study, revision a, Sam Bruner ... [and others]
- Minimum weight design of a generic axisymmetric inlet, Shari-Beth Nadell
- Structural framework for flight, NASA's role in development of advanced composite materials for aircraft and space structures, Darrel R. Tenney ... [and others]
- Exploration planetary surface structural systems, design requirements and compliance, John T. Dorsey
- Electron beam freeform fabrication of titanium alloy gradient structures, Craig A. Brice [and five others]
- Dynamic analysis with stress mode animation by the integrated force method, Surya N. Patnaik, Rula M. Coroneos and Dale A. Hopkins
- Three-dimensional cellular structures enhanced by shape memory alloys, Michael V. Nathal [and four others]
- Minimum weight design of structures via optimality criteria, by J. Kiusalaas
- Flightweight radiantly and actively cooled panel, thermal and structural performance, Charles P. Shore, Robert J. Nowak, and H. Neale Kelly
- Conceptual design of an advanced stirling conversion system for terrestrial power generation, Mechanical Technology Incorporated [and three others]
- Evaluation of ceramic honeycomb core compression behavior at room temperature, R. Keith Bird, Thomas S. LaPointe
- ACT payload shroud structural concept analysis and optimization, Bart F. Zalewski, Brett A. Bednarcyk ; prepared for the 16th U.S. National Congress on Theoretical and Applied Mechanics (USNCTAM) sponsored by the U.S. Committee on Theoretical and Applied Mechanics, University Park, Pennsylvania, June 27-July 2, 2010
- Issues and strategies in solving multidisciplinary optimization problems, Surya Patnaik
- Tables of stiffness and carry-over factor for structural members under axial load, by Eugene E. Lundquist and W.D. Kroll
- A method of estimating the critical buckling load for structural members, by Eugene E. Lundquist
- Two-stage reusable launch system utilizing a winged core vehicle and glideback boosters, Ian O. MacConochie ... [and others]
- Initial evaluation of acoustic emission SHM of PRSEUS multi-bay box tests, Michael R. Horne, Eric I. Madaras
- A general-purpose optimization engine for multi-disciplinary design applications, Surya N. Patnaik, Dale A. Hopkins and Laszlo Berke
- Curvilinear displacement transfer functions for deformed shape predictions of curved structures using distributed surface strains, William L. Ko, and Van Tran Fleischer, Shun-Fat Lung
- Space infrared telescope facility wide field and diffraction limited array camera (IRAC), final report for the period 1September 1984 through 31 October 1987, principal investigator, Dr. Giovanni G. Fazio
- The lateral failure of spars, by Stevens Bromley and William H. Robinson, Jr
- Comparison of requirements for composite structures for aircraft and space applications, Ivatury S. Raju ... [and others]
- Design and evaluation of a new boundary layer rake for flight testing, Trong T. Bui and David L. Oates, Jose c. Gonsalez
- Aeroelastic tailoring of transport aircraft wings, state-of-the-art and potential enabling technologies, Christine V. Jutte, Bret K. Stanford
- Building big, with David Macaulay ; managing director Alan Ritsko ; executive-in-charge Paula S. Apsell ; executive producer Larry Klein
- Approximate pressure distribution in an accelerating launch-vehicle fuel tank, Michael P. Nemeth
- Deterministic design optimization of structures in OpenMDAO framework, Rula M. Coroneos and Shantaram S. Pai
- Performance trend of different algorithms for structural design optimization, Surya N. Patnaik [and three others]
- Integrated structure/control law design by multilevel optimization, Michael G. Gilbert, David K. Schmidt
- Corrosion on Mars, effect of the Mars environment on spacecraft materials, Luz M. Calle
- Thermoelastic stress analysis, the mean stress effect in metallic alloys, Andrew L. Gyekenyesi, George Y. Baaklini
- The effect of boundary support and reflector dimensions on inflatable parabolic antenna performance, Michael J. Coleman and Frank Baginski, Robert R. Romanofsky
- Radio frequency plasma synthesis of boron nitride nanotubes (BNNTs) for structural applications, part II, Stephen J. Hales, Joel A. Alexa, Brian J. Jensen
- An assessment of the state-of-the-art in the design and manufacturing of large composite structures for aerospace vehicles, Charles E. Harris, James H. Starnes, and Mark J. Shuart
- Design and use of a guided weight impactor to impart barely visible impact damage, Andrew E. Lovejoy, Adam Przekop
- Design of helicopter rotor blades for optimum dynamic characteristics, by David A. Peters, ... [and others]
- A structural design decomposition method utilizing substructuring, Stephen J. Scotti
- Design, fabrication, and delivery of a miniature Cassegrainian concentrator solar array system, final technical report, prepared by Mark A. Kruer
- Finite-element analysis of a Mach-8 flight test article using nonlinear contact elements, W. Lance Richards
- Large-scale advanced prop-fan (LAP) ptich change actuator and control design report, by Robert A. Schwartz, Paul Carvalho, Mark J. Cutler
- High-performance deployable structures for the support of high-concentration ratio solar array models, final report, by Mehran Mobrem ; prepared by Astro Aerospace Corporation
- Stability of structural members under axial load, by Eugene E. Lundquist
- Building structures, from concepts to design, Malcolm Millais
- Design methods for reducing the risk of progressive collapse in buildings, prepared for Division of Energy, Building Technology and Standards, Office of Policy Development and Research, Department of Housing and Urban Development [by] Edgar V. Leyendecker and Bruce R. Ellingwood
- Quality and productivity drive innovation and improvement at United Technologies Aerospace Operations, Inc., Dr. L.G. Jamar, PE
- Testing for random limit load versus static limit load, H.M. Lee
- Structural tests of a stainless steel wing panel by hydrostatic loading, by Ralph H. Upson
- The fuel cell in space, yesterday, today and tomorrow, Marvin Warshay and Paul R. Prokopius
Outgoing Resources
- Focus1