Mechanical properties
Label
Mechanical properties
Name
Mechanical properties
Source
nasat
Actions
Incoming Resources
- Probabilistic modeling of high-temperature material properties of a 5-harness 0/90 Sylramic fiber/CVI-SiC/MI-SiC woven composite, Vinod K. Nagpal [and three others]
- Transverse vibration and buckling of a cantilevered beam with tip body under constant axial base acceleration, by Joel Storch and Stephen Gates
- Constitutive soil properties for mason sand and Kennedy Space Center, Michael A. Thomas and Daniel E. Chitty
- Bearing-load modeling and analysis study for mechanically connected structures, Norman F. Knight, Jr
- An evaluation of two flat-black silicone paints for space application, Carroll H. Clatterbuck, John J. Scialdone
- Thermal and mechanical buckling analysis of hypersonic aircraft hat-stiffened panels with varying face sheet geometry and fiber orientation, William L. Ko
- Effect of angle of attack on slope climbing performance, Colin M. Creager, Lucas Jones, and Lauren M. Smith
- A general reversible hereditary constitutive model, A.F. Saleeb, S.M. Arnold, Part I
- Space Transportation System (STS)-133/external tank (ET)-137 intertank (IT) stringer cracking issue and repair assessment, proximate cause determination and material characterization study, Robert S. Piascik
- Metal matrix composite micromechanics, in-situ behavior influence on composite properties, P.L.N. Murthy, D.A. Hopkins, and C.C. Chamis
- Parallel grand canonical Monte Carlo (ParaGrandMC) simulation code, Vesselin I. Yamakov
- Investigation of a macromechanical approach to analyzing triaxially-braided polymer composites, Robert K. Goldberg, Brina J. Blinzler and Wieslaw K. Binienda ; prepared for the 51st Structures, Structural Dynamics, and Materials Conference cosponsored by the AIAA, ASME, ASCE, AHS, and ASC, Orlando, Florida, April 12-15, 2010
- Multiscale modeling of PEEK using reactive molecular dynamics modeling and micromechanics, William A. Pisani [and six others]
- Qualifying bulk metallic glass gear materials for spacecraft applications, Stephen J. Hales, David E. Stegall
- Effects of cobalt in nickel-base superalloys, John K. Tien and Robert N. Jarett
- Grain boundary engineering the mechanical properties of Allvac 718Plus[trademark symbol] superalloy, Timothy P. Gabb ... [and others]
- Elevated temperature compressive strength properties of oxide dispersion strengthened NiAl after cryomilling and roasting in nitrogen, J. Daniel Whittenberger [and others]
- Effects of interface modification on mechanical behavior of hi-nicalon fiber-reinforced celsian matrix composites, Narottam P. Bansal and Jeffrey I. Eldridge ; prepared for the 21st annual conference and exposition on composites, advanced ceramics, materials, and structures sponsored by the American Ceramic Society, Cocoa Beach, Florida, January 12-16, 1997
- Statistical models of fracture relevant to nuclear-grade graphite, review and recommendations, Noel N. Nemeth, Robert L. Bratton
- Simulated data for high temperature composite design, Christos C. Chamis, Galib H. Abumeri
- Normalization of impact energy by laminate thickness for compression after impact testing, A.T. Nettles and S.M. Hromisin
- High-temperature mechanical properties of polycrystalline hafnium carbide and hafnium carbide containing 13-volume-percent hafnium diboride, by William A. Sanders and Hubert B. Probst
- Exploratory study of mechanical properties and heat treatment of molybdenum-hafnium-carbon alloys, by Peter Raffo
- Edgewise compression testing of STIPS-0 (Structurally Integrated Thermal Protection System), Amy R. Brewer
- The repair and return to flight of solid rocket booster forward skirt serial number 20022, T.W. Malone and C.S. Jones, J.H. Honeycutt, Sr
- Study on effects of powder and flake chemistry and morphology on the properties of Al-Cu-Mg-X-X-X powder metallurgy advanced aluminum alloys, P.J. Meschter ... [and others]
- Mechanical properties of degraded PMR-15 resin, Luis C. Tsuji and Hugh L. McManus, Kenneth J. Bowles
- The effect of heating on the degradation of ground laboratory and space irradiated Teflon ® FEP, Kim K. de Groh, Morgana Martin
- Assessments of mechanical and life limiting properties of two candidate silicon nitrides for stirling converter heater head applications, Sung R. Choi, David L. Krause
- Determination of HART I blade structural properties by laboratory testing, Sung N. Jung, Benton H. Lau
- The effects of molecular weight on the single lap shear creep and constant strain rate behavior of thermoplastic polyimidesulfone adhesive, Sanley K. Dembosky and Erol Sancaktar
- Thermostructural analysis of the SOFIA fine field and wide field imagers subjected to convective thermal shock, Christopher B. Kostyk
- Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading, a semi-annual status report, by G.J. Simitses and R. Riff
- Improvement of GRCop-84 through the addition of zirconium, David L. Ellis and Bradley A. Lerch
- High temperature dispersion strengthening of NiAl, Mark Sherman and Krishna Vedula
- Influence of molecular weight on the mechanical performance of a thermoplastic glassy polyimide, Lee M. Nicholson[ and three others]
- Strength, fracture toughness, and slow crack growth of zirconia/alumina composites at elevated temperature, Sung R. Choi, Narottam P. Bansal
- Impact testing of aluminum 2024 and titanium 6A1-4V for material model development, J. Michael Pereira [and three others]
- Effects of chromium and aluminum on mechanical and oxidation properties of iron-nickel-base superalloys based on CG-27, Susan R. Schuon
- Cubic zig-zag enrichment of the classical Kirchhoff kinematics for laminated and sandwich plates, Michael P. Nemeth
- PRSEUS acoustic panel fabrication, Alex Velicki [and five others]
- Investigation of mechanical properties of chromium, chromium-rhenium, and derived alloys to National Aeronautics and Space Administration, by A. Gilbert, M.J. Klein, and J.W. Edington
- Compression failure mechanisms of composite structures, H. Thomas Hahn, Mohsen Sohi, and Suresh Moon
- Strain rate dependent deformation and strength modeling of a polymer matrix composite utilizing a micromechanics approach, by Robert Keith Goldberg
- Corrosion on Mars, effect of the Mars environment on spacecraft materials, Luz M. Calle
- An experimental investigation of silicone-to-metal bond strength in composite space docking system seals, Mason C. Conrad, Christopher C. Daniels and Marta B. Bastrzyk ; prepared for the 45th Joint Propulsion Conference and Exhibit cosponsored by AIAA, ASME, SAE, and ASEE, Denver, Colorado, August 2-5, 2009
- Analyses of Hubble Space Telescope aluminized-teflon insulation retrieved after 19 years of space exposure, Kim K. de Groh [and four others]
- Evaluation of pressurization fatigue life of 1441 Al-Li fuselage panel, R. Keith Bird and Dennis L. Dicus
- Mechanical properties of LaRC [superscript TM] SI polymer for a range of molecular weights, Karen S. Whitley [and three others]
- Rhenium mechanical properties and joining technology, Brian D. Reed and James A. Biaglow
Outgoing Resources
- Focus1