Turner-Fairbank Highway Research Center
Label
Turner-Fairbank Highway Research Center
Name
Turner-Fairbank Highway Research Center
Actions
Incoming Resources
- Evaluation of LS-DYNA wood material model 143, Y. D. Murray [and four others]
- Design and construction of UHPC-based bridge preservation and repair solutions
- Evaluation of pavement safety performance, David K. Merritt, Craig A. Lyon, Bhagwant N. Persaud ; The Transtec Group, Inc
- Safety evaluation of the safety edge treatment, [J.L. Graham ... and others]
- Office of Operations R&D.
- Long-term Pavement Performance Program manual for falling weight deflectometer measurements, Peter N. Schmalzer
- Submerged flow bridge scour under clear water conditions
- Long-term Pavement Performance Program manual for profile measurements and processing, [R.W. Perera, S.D. Kohn, and G.R. Rada]
- Safety evaluation of corner clearance at signalized intersections, Thanh Le [and three others]
- Long-term pavement performance Ohio SPS-1 and SPS-2 dynamic load response data processing, Mahesh Agurla and Sean Lin
- In-vehicle display icons and other information elements, J. L. Campbell [and three others]
- LTPP climate tool
- Hydraulics of Iowa DOT slope-tapered pipe culverts, Frank Graziano [and three others]
- Safety effectiveness of the HAWK pedestrian crossing treatment
- Wind induced vibration of stay cables, [Sena Kumarasena and three others]
- Methodology for analysis of soluble salts from steel substrates, summary report, Long-Term Bridge Performance Program
- Pier scour in clear-water conditions with non-uniform bed materials
- Federal Highway Administration university course on bicycle and pedestrian transportation
- Pedestrian and bicyclist traffic control device evaluation methods, Susan T. Chrysler [and three others]
- Double crossover diamond interchange, [performed by Warren Hughes and Ram Jagannathan]
- Users manual for LS-DYNA concrete material model 159, [Yvonne D. Murray]
- Compilation and evaluation of results from high-performance concrete bridge projects, H.G. Russell [and three others]
- Construction quality assurance for design-build highway projects
- Simplified techniques for evaluation and interpretation of pavement deflections for network-level analysis, guide for assessment of pavement structural performance for PMS applications, [R. Stubstad ... and others]
- Corrosion resistant alloys for reinforced concrete, [William H. Hartt ... and others]
- Materials and methods for corrosion control of reinforced and prestressed concrete structures in new construction, J. L. Smith and Y. P. Virmani
- Using reclaimed asphalt pavement in pavement-preservation treatments, Gregory Duncan [and 3 others]
- Surrogate Safety Assessment Model (SSAM)
- Long-term performance of epoxy-coated reinforcing steel in heavy salt-contaminated concrete, Seung-Kyoung Lee, Paul D. Krauss
- Seismic retrofitting manual for highway structures, Ian G. Buckle [and ten others]
- Pavement structural evaluation at the network level
- Screening level assessment of arsenic and lead concentrations in glass beads used in pavement markings, Bryan Boulanger [and three others]
- Concrete mixture optimization using statistical methods, final report, M. J. Simon
- Strengthening historic covered bridges to carry modern traffic
- Performance test for geosynthetic reinforced soil including effects of preloading, Kanop Ketchart and Johathan T.H. Wu
- Research & technology transporter on-line
- Curl and warp analysis of the LTPP SPS-2 site in Arizona
- Long term pavement performance compliance with Department of Transportation information dissemination quality guidelines, [Gary E. Elkins]
- Classification of features of pavement profiles using empirical mode decomposition
- A new development length equation for pretensioned strands in bridge beams and piles, author Susan N. Lane
- Identification of nondestructive evaluation needs for the United States highway infrastructure, [Shane D. Boone]
- Evaluation of lane reduction "road diet" measures and their effects on crashes and injuries
- The development of crash modification factors, highway safety statistical paper synthesis, Eric Donnell [and seven others]
- Bottomless culvert scour study, laboratory report
- LTBP news
- Accelerated determination of ASR susceptibility during concrete prism testing through nonlinear resonance ultrasonic spectroscopy
- Multiple corrosion protection systems for reinforced concrete bridge components, [David Darwin ... and others]
- Highway concrete pavement technology development and testing, Paul Krauss [and seven others]
- Job site evaluation of corrosion-resistant alloys for use as reinforcement in concrete, William H. Hart [and four others]
- Modeling of hot-mix asphalt compaction, a thermodynamics-based compressible viscoelastic model, [Eyad Masad ... and others]
- Creator of2
- Focus of2
- Author of1
- Corrosion monitoring research of New York City bridges
- Evaluation of lane reduction "road diet" measures on crashes
- Laboratory evaluation of waterborne coatings on steel, Shuang-Ling Chong and Yuan Yao
- Corrosivity of water-soluble sulfate ions in simulated pore water solutions and different types of grout samples, Seung-Kyoung Lee
- Wearable sensors in transportation -- Exploratory Advanced Research Program initial stage investigation, arthor(s), Elizabeth Machek [and three others]
- Traffic control device conspicuity, authors, Vaughan W. Inman, Stacy A. Balk, William A. Perez
- Design and construction of PCC pavements, authors, E. B. Owusu-Antwi, L. Titus-Glover, M. I. Darter
- Cooperative automation research: high-level framework of CARMA proof-of-concept TSMO use case testing for CARMA streets
- Human factors assessment of pedestrian roadway crossing behavior, authors, Stacy A. Balk [and three others]
- Design and construction of field-cast UHPC connections
- Pier scour estimation for tsunami at bridges
- Federal Highway Administration design manual, deep mixing for embankment and foundation support, authors, Mary Ellen C. Bruce [and five others]
- Study of LTPP distress data variability, [G.R. Rada and five others]
- Novel highway signs to support infrastructure-based motorcycle-crash countermeasures, Phase II
- Reformulated pavement remaining service life framework, Gary E. Elkins [and four others]
- Liquefaction-induced downdrag on continous flight auger (CFA) piles from full-scale tests using blast liquefaction
- Assessing stream channel stability at bridges in physiographic regions, Peggy A. Johnson
- Pedestrian and bicyclist intersection safety indices, authors, Daniel L. Carter [and three others]
- Safety evaluation of turning movement restrictions at stop-controlled intersections
- Highway effects on vehicle performance, Earl C. Klaubert
- LTPP profile variability, Lynn D. Evans and Ahmed Eltahan
- Mechanistic evaluation of test data from LTPP jointed concrete pavement test sections, Y. Jane Jiang, Shiraz D. Tayabji, and Chung L. Wu
- Covered bridges and the birth of American engineering, editors Justine Christianson [and three others] ; authors James Barker [and seven others]
- Design and construction guidelines for geosynthetic reinforced soil abutments and integrated bridge systems, Michael Adams and Jennifer Nicks
- Countdown Pedestrian Signals (CPS) legibility and comprehension without flashing hand
- Distress identification manual for the Long-Term Pavement Performance Program, John S. Miller and William Y. Bellinger
- Characterization of transverse profiles, A. L. Simpson
- Review of the long-term pavement performance backcalculation results--final report, R.N. Stubstad [and three others]
- The effects of commercial electronic variable message signs (CEVMS) on driver attention and distraction, an update, author(s) John A. Molino [and four others]
- Alkali-silica reaction mechanisms and detection, an advanced understanding
- Composite behavior of geosynthetic reinforced soil mass, authors, Jonathan T.H. Wu, Thang Q. Pham, and Michael T. Adams
- Cooperative automation research: CARMA proof-of-concept transportation system management and operations use case 3-traffic signal optimization with CDA at signalized intersections
- Addressing challenges and return on investment (ROI) for paperless project delivery (e-construction)
- Characterization of Bridge Foundations workshop report, authors, Vernon R. Schaefer and Frank Jalinoos
- LTPP pavement maintenance materials, SHRP joint reseal experiment, final report, K. L. Smith and A. R. Romine
- Safety evaluation of multiple strategies at signalized intersections
- Curb-opening inlet interception on grade
- Comparison of driver yielding for three rapid-flashing patterns used with pedestrian crossing signs
- Curl and warp analysis of the LTPP SPS-2 site in Arizona, [Steven M. Karamihas and Kevin Senn]
- Development of non-proprietary ultra-high performance concrete for use in the highway bridge sector
- Safety evaluation of centerline plus shoulder rumble strips
- Summary of projects funded by the Federal Highway Administration for the National Surface Transportation Safety Center for Excellence from July 2006 to June 2014, Jonathan M. Hankey, Michael G. Buckley, and Sarah T. Pursley
- Slip and creep of thermal spray coatings
- Safety evaluation of intersection conflict warning systems, Scott Himes [and three others]
- FY ... performance report
- Developing crash modification factors for bicycle-lane additions while reducing lane and shoulder widths, Raul Avelar [and four others] ; Texas A&M Transportation Institute, The Texas A&M University System
- Dynamic properties of stay cables on the Penobscot Narrows Bridge, authors, Harold R. Bosch and James R. Pagenkopf
- Validation of accident models for intersections, Simon Washington [and three others]
- Fatigue testing of galvanized and ungalvanized socket connections, Justin M. Ocel, Ph.D., P.E
- Adjacent box beam connections, performance and optimization, Jiqiu Yuan, Benjamin A. Graybeal, and Kevin Zmetra
- inverse.sponsoringbody1