Langley Research Center
Label
Langley Research Center
Name
Langley Research Center
Mapped to
Actions
Incoming Resources
- Current performance characteristics of NASA Langley Research Center's cockpit motion base and standardized test procedure for future performance characterization, Brandon Cowen [and four others]
- Mechanical properties of LaRC [superscript TM] SI polymer for a range of molecular weights, Karen S. Whitley [and three others]
- Evaluation of alternatives for trichlorotrifluoroethane (CFC-113) to clean and verify liquid oxygen systems, Michelle L. Morris
- Fixed-base visual simulation of pilot-controlled descents of an advanced Apollo spacecraft with an all-flexible parawing, by G. Kimball Miller, Jr., Byron M. Jacquet, and Douglas B. Price
- Performance characterization of Loctite® 242 and 271 liquid locking compounds (LLCs) as a secondary locking feature for International Space Station (ISS) fasteners, Michael J. Dube, Wayne R. Gamwell
- Multifidelity analysis and optimization for supersonic design, Ilan Kroo ... [and others]
- Model-driven test generation of distributed systems, Arvind Easwaran, Brendan Hall, and Kevin Schweiker
- Induced drag ideal efficiency factor of arbitrary lateral-vertical wing forms, John DeYoung ; prepared for Langley Research Center
- Photogrammetry toolbox reference manual, Tianshu Liu, Alpheus W. Burner
- Constellation Program (CxP) Crew Exploration Vehicle (CEV) Parachute Assembly System (CPAS) independent design reliability assessment, Michael J. Kelly
- Flight simulation model exchange, Daniel G. Murri, E. Bruce Jackson
- Analysis of well-clear boundary models for the integration of UAS in the NAS, Jason M. Upchurch [and four others]
- Calibration of sonic valves for the laminar flow control, leading-edge flight test, Dennis H. Petley [and three others]
- Composite crew module, primary structure, Michael T. Kirsch
- A comparison of signal enhancement methods for extracting tonal acoustic signals, Michael G. Jones
- Two time scale output feedback regulation for ill-conditioned systems, Anthony J. Calise and Daniel D. Moerder
- Tactical aircraft spacing -- en route (TAS-E), concept overview, Ryan C. Chartrand [and three others]
- Modeled and measured dynamics of a composite beam with periodically varying form core, Randolph H. Cabell ... [and others]
- Optically based flame detection in the NASA Langley 8-ft high-temperature wind tunnel, Stephen E. Borg
- Factorization of the compressible Navier-Stokes equations, Thomas W. Roberts
- Design of fuselage shapes for natural laminar flow, S.S. Dodbele, C.P. van Dam, P.M.H.W. Vijgen
- Design and application of strategies/tactics in higher order logics, edited by Myla Archer, Ben Di Vito, César Muñoz
- Capture-ejector satellites, Ian O. MacConochie, Charles H. Eldred, and James A. Martin
- Reynolds number effects on the performance of lateral control devices, Raymond E. Mineck
- Notched strength allowables and inplane shear strength of AS4/VRM-34 textile laminates, Ray W. Grenoble, William M. Johnston
- DAIDALUS observations from UAS integration in the NAS Project Flight Test 4, Michael J. Vincent, Dimitrios Tsakpinis
- Experimental and analytical evaluation of a composite honeycomb deployable energy absorber, Karen E. Jackson [and six others]
- A System for aerodynamic design and analysis of supersonic aircraft, prepared for Langley Research Center
- Spectroscopic analysis of radiation-generated changes in tensile properties of a polyetherimide film, Edward R. Long, Jr., and Sheila Ann T. Long
- Wake vortex field measurement program at Memphis, Tennessee, data guide, S.D. Campbell [and six others]
- An experimental study of a stitched composite with a notch subjected to combined bending and tension loading, Susan O. Palmer, Alan T. Nettles, and C.C. Poe, Jr
- Schedules for mapping irregular parallel computations, David M. Nicol, Joel H. Saltz
- Experimental measurements of sonic boom signatures using a continuous data acquisition technique, Floyd J. Wilcox, Jr., and Alaa A. Elmiligui
- Design considerations for an air core magnetic actuator, Nelson J. Groom
- Guidebook for assessing similarity and implementing empirical transfer functions for probability of detection (POD) demonstrations for signal based nondestructive evaluation (NDE) methods, Ajay Koshti [and five others]
- LAURA users manual, 5.3-48528, Alireza Mazaheri ... [and others]
- A method for the reduction of aerodynamic drag of road vehicles, Bandu N. Pamadi, Larry W. Taylor, and Terrance O. Leary
- Process sensitivity, performance, and direct verification testing of adhesive locking features, Johnny L. Golden [and four others]
- Lithium-drifted silicon detectors as low-energy photon spectrometers, by Sherwin M. Beck
- Large Civil Tiltrotor (LCTR2) interior noise predictions due to turbulent boundary layer excitation, Ferdinand W. Grosveld
- A review of function allocation and en route separation assurance, Timothy A. Lewis [and three others]
- CFD vision 2030 study, a path to revolutionary computational aerosciences, Jeffrey Slotnick [and six others]
- Vapor-screen flow-visualization experiments in the NASA Langley 0.3-m transonic cryogenic tunnel, Gregory Vincent Selby
- Investigation and development of control laws for the NASA Langley Research Center Cockpit Motion Facility, Craig R. Coon, Frank M. Cardullo, and Kirill B. Zaychik
- Fatigue-life prediction methodology using small-crack theory, J.C. Newman, Jr. and E.P. Phillips, M.H. Swain
- Numerical simulation of pressure-induced separation of turbulent flat-plate boundary layers, definition and overview of new cases with suction-only transpiration and a step in Reynolds Number, Gary Neil Coleman
- A comparison of tension and compression creep in a polymeric composite and the effects of physical aging on creep, Thomas S. Gates, David R. Veazie, L. Catherine Brinson
- Structural framework for flight, NASA's role in development of advanced composite materials for aircraft and space structures, Darrel R. Tenney ... [and others]
- Aeroacoustic codes for rotor harmonic and BVI noise - CAMRAD.Modl/HIRES, methodology and users' manual, D. Douglas Boyd, Jr. [and three others]
- Flight avionics hardware roadmap, Avionics Steering Committee ; authors, Hodson, Robert F. [and ten others]
- Creator of1
- Focus of5
- Author of8
- Computer-automated opponent for manned air-to-air combat simulations, Walter W. Hankins III
- Inverse boundary-layer theory and comparison with experiment, James E. Carter
- Low-speed stability-and-control and ground-effects measurements on the industry reference high speed civil transport, Guy T. Kemmerly [and three others]
- Aerodynamic characteristics of a hypersonic research airplane concept having a 70 ̊swept double-delta wing at Mach numbers from 0.80 to 1.20, with summary of data from 0.20 to 6.0, Jim A. Penland, James B. Hallissy, and James L. Dillon
- Adaptive identification and control of structural dynamics systems using recursive lattice filters, N. Sundararajan, Raymond C. Montgomery, and Jeffrey P. Williams
- Aerodynamic measurements on a large splitter plate for the NASA Langley Transonic Dynamics Tunnel, David M. Schuster
- Supersonic investigation of nozzle hinge moments of a modified Saturn C-1 model with and without jet flow, by Nickolai Charczenko and Jerry L. Lowery
- Comparison of Space Shuttle Orbiter low-speed static stability and control derivatives obtained from wind-tunnel and approach and landing flight tests, Delma C. Freeman, Jr., and Barnard Spencer, Jr
- Evaluation of alternatives for trichlorotrifluoroethane (CFC-113) to clean and verify liquid oxygen systems, Michelle L. Morris
- Experimental measurements of sonic boom signatures using a continuous data acquisition technique, Floyd J. Wilcox, Jr., and Alaa A. Elmiligui
- Airborne spacing for terminal arrival routes (ASTAR) proof-of-concept flight test, Roy D. Roper [and three others]
- Investigation and development of control laws for the NASA Langley Research Center Cockpit Motion Facility, Craig R. Coon, Frank M. Cardullo, and Kirill B. Zaychik
- Design and application of strategies/tactics in higher order logics, edited by Myla Archer, Ben Di Vito, César Muñoz
- Fatigue-life prediction methodology using small-crack theory, J.C. Newman, Jr. and E.P. Phillips, M.H. Swain
- Space shuttle orbiter trimmed center-of-gravity extension study, W. Pelham Phillips and Roger H. Fournier, Volume ix
- A comparison of signal enhancement methods for extracting tonal acoustic signals, Michael G. Jones
- Optically based flame detection in the NASA Langley 8-ft high-temperature wind tunnel, Stephen E. Borg
- An experimental study of a stitched composite with a notch subjected to combined bending and tension loading, Susan O. Palmer, Alan T. Nettles, and C.C. Poe, Jr
- Numerical simulation of pressure-induced separation of turbulent flat-plate boundary layers, definition and overview of new cases with suction-only transpiration and a step in Reynolds Number, Gary Neil Coleman
- Aeroacoustic codes for rotor harmonic and BVI noise - CAMRAD.Modl/HIRES, methodology and users' manual, D. Douglas Boyd, Jr. [and three others]
- Photogrammetry toolbox reference manual, Tianshu Liu, Alpheus W. Burner
- Large Civil Tiltrotor (LCTR2) interior noise predictions due to turbulent boundary layer excitation, Ferdinand W. Grosveld
- A test for characterizing delamination migration in carbon/epoxy tape laminates, James G. Ratcliffe, Michael W. Czabaj and Thomas K. O'Brien
- Spin forming of an aluminum 2219-T6 aft bulkhead for the Orion Multi-Purpose Crew Vehicle, phase II supplemental report, Robert S. Piascik [and three others]
- An overview of a trajectory-based solution for en route and terminal area self-spacing, seventh revision, Terence S. Abbott
- Modeling techniques for high dependability protocols and architecture, Brian LaValley, Peter Ellis, and Chris J. Walter
- Notched strength allowables and inplane shear strength of AS4/VRM-34 textile laminates, Ray W. Grenoble, William M. Johnston
- Wind tunnel investigation of the supersonic stage separation aerodynamics of a generic 0.0175- scale bimese two-stage-to-orbit reusable launch vehicle configuration, Gary E. Erickson
- Applied operations research, operator's assistant, Stuart K. Cole
- Process sensitivity, performance, and direct verification testing of adhesive locking features, Johnny L. Golden [and four others]
- Flight avionics hardware roadmap, Avionics Steering Committee ; authors, Hodson, Robert F. [and ten others]
- Aerothermal analysis and design of the Gravity Recovery and Climate Experiment (GRACE) spacecraft, Daniel D. Mazanek, Renjith R. Kumar, Min Qu, and Hans Seywald
- UAS in the NAS, survey responses by ATC, manned aircraft pilots, and UAS pilots, James R. Comstock, Jr. [and four others]
- Design considerations for an air core magnetic actuator, Nelson J. Groom
- A comparison of tension and compression creep in a polymeric composite and the effects of physical aging on creep, Thomas S. Gates, David R. Veazie, L. Catherine Brinson
- Analytical methodology for predicting the onset of widespread fatigue damage in fuselage structure, C.E. Harris [and three others]
- Model-driven test generation of distributed systems, Arvind Easwaran, Brendan Hall, and Kevin Schweiker
- Systems analysis of NASA aviation safety program, final report, Sharon Monica Jones [and five others]
- Low energy nuclear reaction aircraft--2013 ARMD Seedling Fund Phase I Project, Douglas P. Wells [and eighteen others]
- Analysis of well-clear boundary models for the integration of UAS in the NAS, Jason M. Upchurch [and four others]
- Tactical aircraft spacing -- en route (TAS-E), concept overview, Ryan C. Chartrand [and three others]
- Dual-pump CARS development and application to supersonic combustion, Gaetano Magnotti and Andrew D. Cutler
- Guidebook for assessing similarity and implementing empirical transfer functions for probability of detection (POD) demonstrations for signal based nondestructive evaluation (NDE) methods, Ajay Koshti [and five others]
- Current performance characteristics of NASA Langley Research Center's cockpit motion base and standardized test procedure for future performance characterization, Brandon Cowen [and four others]
- The construction fo airfoil pressure models by the bonded plate method, achievements, current research, technology development and potential applications, Pierce L. Lawing
- Simplified aircraft-based paired approach, concept definition and initial analysis, Sally C. Johnson [and five others]
- Mechanical properties of LaRC [superscript TM] SI polymer for a range of molecular weights, Karen S. Whitley [and three others]
- CFD vision 2030 study, a path to revolutionary computational aerosciences, Jeffrey Slotnick [and six others]
- A review of function allocation and en route separation assurance, Timothy A. Lewis [and three others]
- Wake vortex field measurement program at Memphis, Tennessee, data guide, S.D. Campbell [and six others]
- Flexible micropost arrays for shear stress measurement, Christopher J. Wohl [and six others]
- Performance and environmental assessment of an advanced aircraft with open rotor propulsion, Mark D. Guynn [and four others]
- Experimental results for temporally overlapping pulses from Quantel EverGreen 200 laser, A. Neal Watkins
- Applying pressure sensitive paint technology to rotor blades, A. Neal Watkins [and five others]
- Method for the collection, gravimetric and chemical analysis of nonvolatile residue (NVR) on surfaces, Keith Gordon, Gugu Rutherford, and Denisse Aranda
- Buckets, aggregative, intelligent agents for publishing, Michael L. Nelson [and three others]
- Raman shifting a tunable ArF excimer laser to wavelengths of 190 to 240 nm with a forced convection Raman cell, R. Jeffrey Balla and G.C. Herring
- Structural analysis peer review for the static display of the orbiter Atlantis at the Kennedy Space Center visitors center, Stephen J. Minute
- cissuingbody1
- inverse.sponsor1
- inverse.sponsoringbody42
- Induced drag ideal efficiency factor of arbitrary lateral-vertical wing forms, John DeYoung ; prepared for Langley Research Center
- Nuclear fragmentation energy and momentum transfer distributions in relativistic heavy-ion collisions, by Ferdous Khan; principal investigator, Govind S. Khandelwal
- A System for aerodynamic design and analysis of supersonic aircraft, prepared for Langley Research Center
- Analysis of flow dynamics through small diameter gas sampling systems, by Kenneth G. Brown, principal investigator
- Parallel processors and nonlinear structural dynamics algorithms and software, principal investigator, Ted Belytschko
- Numerical method for predicting flow characteristics and performance of nonaxisymmetric nozzles, P.D. Thomas ; prepared for Langley Research Center
- Single-mode laser studies, (I) design and performance of a fixed-wavelength laser source and (II) coupling of lasers to thin-film optical waveguides, I. Ladany and J.M. Hammer ; prepared for Langley Research Center
- Bubble Memory Module, O.D. Bohning and F.J. Becker
- Dual methods and approximation concepts in structural synthesis, Claude Fleury and Lucien A. Schmit, Jr
- Environmental protection requirements for scout/shuttle auxiliary stages, G. L. Qualls [and three others] ; prepared for Langley Research Center
- Development of an impact- and solvent-resistant thermoplastic composite matrix, phase IV, final report, C. B. Delano
- Programming parallel architectures, the BLAZE family of languages, Piyush Mehrotra
- Dynamics and control of a five degree-of-freedom magnetic suspension system, Anwar Mohammed Haj
- Hyperbolic/parabolic development for the GIM-STAR code, L.W. Spradley, J.F. Stalnaker, and A.W. Ratliff
- Rotary balance data for a single-engine agricultural airplane configuration for an angle-of-attack range of 8° to 90°, William Mulcay and Julio Chu
- Viscous theory of surface noise interaction phenomena, John E. Yates ; prepared for Langley Research Center
- Radar cross section studies/compact range research, W. D. Burnside [and five others]
- Preliminary development of digital signal processing in microwave radiometers, William D. Stanley ; prepared for Langley Research Center
- Theoretical studies of solar lasers and converters, by John H. Heinbockel, principal investigator
- Advanced composite stabilizer for Boeing 737 aircraft
- GaA1As/GaAs solar cell process study, David W. Almgren and Katinka I. Csigi ; prepared for Langley Research Center
- A computer program for the generation of logic networks from task chart data, Henry E. Herbert ; prepared for Langley Research Center
- A method of boundary parameter estimation for a two-dimensional diffusion system under noisy observations, Y. Sunahara, F. Kojima
- Design and verification by nonlinear simulation of a Mach/CAS control law for the NASA TSRV B-737 aircraft, final report, Kevin R. Bruce
- Manual for obscuration code with space station applications, R. J. Marhefka and L. Takacs
- Weight and balance for the Airmass Incorporated Sunburst Model C ultralight, Jahn A. Woltkamp, project engineer; Carlos L. Blacklock, project manager; Dr. Jan Roskam, principal investigator
- Minimization theory of induced drag subject to constraint conditions, John DeYoung
- Interaction of two-dimensional transverse jet with a supersonic mainstream, by G.O. Kraemer and S.N. Tiwari
- Determination of the static performance of a Cuyuna 430 cc. model UL-430RR engine, Carlos L. Blacklock, project Manager; Dr. Jan Roskam, principal Investigator
- On the subgrid-scale modeling of compressible turbulence, final report, C. G. Speziale [and three others]
- Multigrid method for stability problems, Shlomo Ta'asan
- Pilot weather advisor, W.A. Kilgore [and five others]
- Approaches to control of the large angle magnetic suspension test fixture, by Mehran Ghofrani ; principal investigator, Colin P. Britcher
- Dynamics and control of forward swept wing aircraft, Dr. David K. Schmidt, Dr. Terrence A. Weisshaar, principal investigators
- Design of the Annular Suspension and Pointing System (ASPS), (including design addendum), D. Cunningham [and six others] ; prepared for Langley Research Center
- Resource utilization model for the algorithm to architecture mapping model, by John W. Stoughton, principal investigator and Rakesh R. Patel, graduate research assistant ; submitted by the Old Dominion University Research Foundation
- Software-implemented fault insertion, an FTMP example, Edward W. Czeck, Daniel P. Siewiorek, and Zary Z. Segall
- Parallel pivoting combined with parallel reduction, Gita Alaghband
- Theoretical studies of solar-pumped lasers, by Wynford L. Harries, principal investigator
- Refraction and scattering of sound by a shear layer, Robert H. Schlinker and Roy K. Amiet
- Prediction of far field noise from wind energy farms, Kevin P. Shepherd and Harvey H. Hubbard
- A fault injection experiment using the airlab diagnostic emulation facility, Robert Baker, Scott Mangum, and Charlotte Scheper
Outgoing Resources
- Mapped to1