United States, National Aeronautics and Space Administration, Scientific and Technical Information Branch
Label
United States, National Aeronautics and Space Administration, Scientific and Technical Information Branch
Name
United States
Subordinate unit
National Aeronautics and Space AdministrationScientific and Technical Information Branch
Actions
Incoming Resources
- Total energy-rate feedback for automatic glide-slope tracking during wind-shear penetration, Christine M. Belcastro and Aaron J. Ostroff
- Bubble Memory Module, O.D. Bohning and F.J. Becker
- Experimental and theoretical study of longitudinal aerodynamic characteristics of delta and double-delta wings at Mach numbers of 1.60, 1.90, and 2.16, Richard M. Wood and Peter F. Covell
- Dual methods and approximation concepts in structural synthesis, Claude Fleury and Lucien A. Schmit, Jr
- Transonic airfoil analysis and design in nonuniform flow, Jen-Fu Chang and C. Edward Lan
- Pseudosteady-state analysis of nonlinear aircraft maneuvers, John W. Young, Albert A. Schy, and Katherine G. Johnson
- Exponential order statistic models of software reliability growth, Douglas R. Miller
- Zero-gravity aerosol behavior, Harry W. Edwards
- Hyperbolic/parabolic development for the GIM-STAR code, L.W. Spradley, J.F. Stalnaker, and A.W. Ratliff
- Searching the horizon, a history of Ames Research Center, 1940-1976, Elizabeth A. Muenger
- Static investigation of two STOL nozzle concepts with pitch thrust-vectoring capability, Mary L. Mason and James R. Burley II
- Measurements of laminar and turbulent flow in a curved duct with thin inlet boundary layers, A.M.K.P. Taylor, J.H. Whitelaw, and M. Yianneskis
- Rotary balance data for a single-engine agricultural airplane configuration for an angle-of-attack range of 8° to 90°, William Mulcay and Julio Chu
- Effect of cage design on characteristics of high-speed-jet-lubricated 35-millimeter-bore ball bearing, Fredrick T. Schuller, Stanley I. Pinel, and Hans R. Signer
- Solid state SPS microwave generation and transmission study, Owen E. Maynard ; prepared for Marshall Space Flight Center
- Nimbus 6 Random Access Measurement System applications experiments, editors, Charles Cote, Ralph Taylor, and Eugene Gilbert
- Numerical solutions of atmospheric flow over semielliptical simulated hills, Chih Fang Shieh and Walter Frost
- WIND, computer program for calculation of three-dimensional potential compressible flow about wind turbine rotor blades, Djordje S. Dulikravich
- Computer-automated opponent for manned air-to-air combat simulations, Walter W. Hankins III
- Measured pressure distributions inside nonaxisymmetric nozzles with partially deployed thrust reversers, Robert S. Green, George T. Carson, Jr
- Spectral flame radiance from a tubular-can combustor, Russell W. Claus
- Conceptual model of turbulent flameholding for scramjet combustors, Paul W. Huber
- A study of crystal growth by solution technique, R.B. Lal
- Use of constrained optimization in the conceptual design of a medium-range subsonic transport, Steven M. Sliwa
- Integrated composite analyzer (ICAN), users and programmers manual, Pappu L.N. Murthy and Christos C. Chamis
- Interrelationships among circumstellar, interstellar, and interplanetary dust, proceedings of a workshop held at the Aspen Institute's Wye Plantation Conference Center, Wye, Maryland, February 27-March 1, 1985, edited by Joseph A. Nuth III and Robert E. Stencel
- Study of wind change for the development of loads reduction techniques for the space shuttle, S.I. Adelfang
- Ice nucleus activity measurements of solid rocket motor exhaust particles, Vernon W. Keller
- Relative control effectiveness technique with application to airplane control coordination, Frederick J. Lallman
- Feasibility of generating an "artificial" burst in a turbulent boundary layer, Mohamed Gad-el-Hak
- Environmental protection requirements for scout/shuttle auxiliary stages, G. L. Qualls [and three others] ; prepared for Langley Research Center
- Experimental performance and analysis of 15.04-centimeter-tip-diameter, radial-inflow turbine with work factor of 1.126 and thick blading, Kerry L. McLallin, Jeffrey E. Hass
- Slip-boundary equations for multicomponent nonequilibrium airflow, Roop N. Gupta, Carl D. Scott, James N. Moss
- Statistical correlation analysis for comparing vibration data from test and analysis, T.G. Butler [and three others]
- Aerodynamic characteristics of three helicopter rotor airfoil sections at Reynolds numbers from model scale to full scale at Mach numbers from 0.35 to 0.90, Kevin W. Noonan and Gene J. Bingham
- Reliability bounds for fault-tolerant systems with competing responses to component failures, Larry D. Lee
- Atmospheric solar absorption measurements in the 9 to 11 [mu]m region using a diode laser heterodyne spectrometer, Charles N. Harward, James M. Hoell, Jr
- Effect of debond growth on stress-intensity factors in a cracked orthotropic sheet stiffened by a semi-infinite orthotropic sheet, C.A. Bigelow
- Numerical solutions of the Navier-Stokes equations for transonic afterbody flows, R. Charles Swanson, Jr
- Guide star probabilities, Raymond M. Soneira and John N. Bahcall
- Low-speed performance of an axisymmetric, mixed-compression, supersonic inlet with auxiliary inlets, Charles J. Trefny and Joseph W. Wasserbauer
- Third International Workshop on Squeezed States and Uncertainty Relations, proceedings of a workshop held at the University of Maryland, Baltimore County, Baltimore, Maryland, August 10-13, 1993, edited by D. Han ... [and others]
- The high speed frontier, case histories of four NACA programs, 1920-1950, by John V. Becker
- High speed lookup table approach to radiometric calibration of multispectral image data, W. Lane Kelly IV, Barry D. Meredith, and William M. Howle
- Optical elements formed by compressed gases, analysis and potential applications, Walton L. Howes
- Flow prediction for propfan engine installation effects on transport aircraft at transonic speeds, S.S. Samant and N.J. Yu
- Simulation comparison of a decoupled longitudinal control system and a velocity-vector control wheel steering system during landings in wind shear, G. Kimball Miller
- Development of a global model for atmospheric backscatter at CO₂ wavelengths, G. S. Kent [and four others]
- Pocketing mechanics of SRM nozzle liner, Vincent S. Verderaime
- Static internal performance of a two-dimensional convergent nozzle with thrust-vectoring capability up to 60 ̊, Laurence D. Leavitt
- Total energy-rate feedback for automatic glide-slope tracking during wind-shear penetration, Christine M. Belcastro and Aaron J. Ostroff
- Experimental and theoretical study of longitudinal aerodynamic characteristics of delta and double-delta wings at Mach numbers of 1.60, 1.90, and 2.16, Richard M. Wood and Peter F. Covell
- A study of the sonic-boom characteristics of a blunt body at a Mach number of 6, George C. Ashby, Jr
- R4 airfoil data corrected for sidewall boundary-layer effects in the Langley 0.3-meter transonic cryogenic tunnel, Renaldo V. Jenkins
- Coupled wave model for large magnet coils, G.J. Gabriel ; prepared for Lewis Research Center
- Dual methods and approximation concepts in structural synthesis, Claude Fleury and Lucien A. Schmit, Jr
- Experimental and theoretical aerodynamic characteristics of two hypersonic cruise aircraft concepts at Mach numbers of 2.96, 3.96, and 4.63, Jimmy L. Pittman and Gregory D. Riebe
- TAS- a transonic aircraft/store flow field prediction code, D.S. Thompson
- Exponential order statistic models of software reliability growth, Douglas R. Miller
- Zero-gravity aerosol behavior, Harry W. Edwards
- Hyperbolic/parabolic development for the GIM-STAR code, L.W. Spradley, J.F. Stalnaker, and A.W. Ratliff
- Measurements of laminar and turbulent flow in a curved duct with thin inlet boundary layers, A.M.K.P. Taylor, J.H. Whitelaw, and M. Yianneskis
- Static investigation of two STOL nozzle concepts with pitch thrust-vectoring capability, Mary L. Mason and James R. Burley II
- Effect of cage design on characteristics of high-speed-jet-lubricated 35-millimeter-bore ball bearing, Fredrick T. Schuller, Stanley I. Pinel, and Hans R. Signer
- Rotary balance data for a single-engine agricultural airplane configuration for an angle-of-attack range of 8° to 90°, William Mulcay and Julio Chu
- A study of crystal growth by solution technique, R.B. Lal
- Solid state SPS microwave generation and transmission study, Owen E. Maynard ; prepared for Marshall Space Flight Center
- WIND, computer program for calculation of three-dimensional potential compressible flow about wind turbine rotor blades, Djordje S. Dulikravich
- Numerical solutions of atmospheric flow over semielliptical simulated hills, Chih Fang Shieh and Walter Frost
- Computer-automated opponent for manned air-to-air combat simulations, Walter W. Hankins III
- Conceptual model of turbulent flameholding for scramjet combustors, Paul W. Huber
- Interrelationships among circumstellar, interstellar, and interplanetary dust, proceedings of a workshop held at the Aspen Institute's Wye Plantation Conference Center, Wye, Maryland, February 27-March 1, 1985, edited by Joseph A. Nuth III and Robert E. Stencel
- Feasibility of generating an "artificial" burst in a turbulent boundary layer, Mohamed Gad-el-Hak
- Ice nucleus activity measurements of solid rocket motor exhaust particles, Vernon W. Keller
- Relative control effectiveness technique with application to airplane control coordination, Frederick J. Lallman
- Integrated composite analyzer (ICAN), users and programmers manual, Pappu L.N. Murthy and Christos C. Chamis
- Experimental performance and analysis of 15.04-centimeter-tip-diameter, radial-inflow turbine with work factor of 1.126 and thick blading, Kerry L. McLallin, Jeffrey E. Hass
- Aerodynamic characteristics of three helicopter rotor airfoil sections at Reynolds numbers from model scale to full scale at Mach numbers from 0.35 to 0.90, Kevin W. Noonan and Gene J. Bingham
- Effect of debond growth on stress-intensity factors in a cracked orthotropic sheet stiffened by a semi-infinite orthotropic sheet, C.A. Bigelow
- Reliability bounds for fault-tolerant systems with competing responses to component failures, Larry D. Lee
- High speed lookup table approach to radiometric calibration of multispectral image data, W. Lane Kelly IV, Barry D. Meredith, and William M. Howle
- Slip-boundary equations for multicomponent nonequilibrium airflow, Roop N. Gupta, Carl D. Scott, James N. Moss
- Flow prediction for propfan engine installation effects on transport aircraft at transonic speeds, S.S. Samant and N.J. Yu
- Guide star probabilities, Raymond M. Soneira and John N. Bahcall
- Low-speed performance of an axisymmetric, mixed-compression, supersonic inlet with auxiliary inlets, Charles J. Trefny and Joseph W. Wasserbauer
- Numerical solutions of the Navier-Stokes equations for transonic afterbody flows, R. Charles Swanson, Jr
- Atmospheric solar absorption measurements in the 9 to 11 [mu]m region using a diode laser heterodyne spectrometer, Charles N. Harward, James M. Hoell, Jr
- Optical elements formed by compressed gases, analysis and potential applications, Walton L. Howes
- Simulation comparison of a decoupled longitudinal control system and a velocity-vector control wheel steering system during landings in wind shear, G. Kimball Miller
- Pocketing mechanics of SRM nozzle liner, Vincent S. Verderaime
- Statistical correlation analysis for comparing vibration data from test and analysis, T.G. Butler [and three others]
- Hydrodynamic aspects of shark scales, William G. Raschi, John A. Musick
- A fan pressure ratio correlation in terms of Mach number and Reynolds number for the Langley 0.3-Meter Transonic Cryogenic Tunnel, Pierce L. Lawing, Jerry B. Adcock, and Charles L. Ladson
- The mosaics of Mars, as seen by the Viking Lander cameras, Elliott C. Levinthal, Kenneth L. Jones ; prepared for NASA Headquarters
- Fabrication and evaluation of superplastically formed/weld-brazed corrugated compression panels with beaded webs, Dick M. Royster [and four others]
- Shuttle/spacelab contamination environment and effects handbook, L.E. Bareiss, R.M. Payton, and H.A. Papazian
- A new NASA/MSFC mission analysis global cloud cover data base, S.C. Brown, W.R. Jeffries III
- Effects of erodant particle shape and various heat treatments on erosion resistance of plain carbon steel, Joshua Salik and Donald H. Buckley
- Static internal performance of a two-dimensional convergent nozzle with thrust-vectoring capability up to 60 ̊, Laurence D. Leavitt
- Mach 6 flow field surveys beneath the forebody of an airbreathing missile, Patrick J. Johnston and James L. Hunt
- issuigbody1
- issuing1
- inverse.sponsoringbody4
- Development of a global model for atmospheric backscatter at CO₂ wavelengths, G. S. Kent [and four others]
- A variational assimilation method for satellite and conventional data, development of basic model for diagnosis of cyclone systems, G.L. Achtemeier [and six others]
- Jet shielding of jet noise, John C. Simonich, Roy K. Amiet, and Robert H. Schlinker
- Transonic airfoil analysis and design in nonuniform flow, Jen-Fu Chang and C. Edward Lan